Surface Etching Designs

Surface Etching Designs are block designs (rather than line drawings), where the black areas are etched and the white areas are left clear (called a positive etch). If the black areas are left clear and the white areas are etched, the etching is called a negative or reverse etch.
Etching glass can be fairly simple! One can make a variety of decorative items / pictures.

Here are the things you will need for Etching:

• Pattern: Start with a simple design without lots of small details. Coloring book for the kids can be a wonderful source for patterns.
• Glass Sheet: Any glass object or mirror will do. You can also use jars, drinking glasses, etc.
• Glass Cleaner: Always start with a clean surface.
• Contact Paper / Etching Tape: Clear or plain, white works best.
• Carbon Paper: To trace your pattern onto the contact paper.
• Utility Knife: To cut your pattern out of the contact paper / etching tape.
• Etching Cream: Readily available at any local craft store, near your home.
• Foam Brush: To apply etching cream or the spread the acid.
• Latex Gloves: To protect your hands from etching cream / acid.

Once you have gathered all your supplies you are ready to begin!

Instructions:

Start out by reading the suggestions from the manufacturer of the etching cream and follow their recommendations.

1. Wear latex gloves when working with etching cream / acid (Make sure the area you are working in is well-ventilated and the work surface is covered).
2. Decide what piece of glass you want to etch. Etching can be done on plain glass sheets, mirrors and glasswares wine glasses, plates and platters, bowls and perfume bottles.
3. Clean the glass surface using glass cleaner. Make sure it is dry and free of all dust.
4. Cut a piece of contact paper at least a few inches larger than your pattern.
5. Place the contact paper on the glass sheet very carefully and ensure that there are no air bubbles.
6. Decide the design you want to use. Place the pattern under the glass sheet.
7. Using a sharp utility knife cut all the details out of the contact paper.
8. (Remember to remove pieces of the contact paper so only the sections of the glass where etching is to be done are exposed).
9. If you are etching a mirror, you should first put a carbon paper on the etching tape, trace out the pattern and then cut out the pattern with the utility knife. (as you can not see the pattern under the mirror).
10. Make sure that all of the edges of the remaining pieces of contact paper are stuck tightly to the glass.
11. Put on the latex gloves. Shake the acid product thoroughly before using it.
12. Apply it according to the instructions on the bottle, making certain to keep the acid off of areas that aren't to be etched.
13. Use a foam brush to spread a thick layer of etching cream onto the exposed sections of your design (you can also use a paper towel).
14. (Be certain that the application is thick enough to properly etch the design into the glass).
15. Apply a thick layer of the etching cream to avoid leakage of the acid product and the pattern could look uneven or streaked.
16. Set your glass in a safe spot, let the acid set on the glass item and wait for 15 minutes.
17. Remove the etching cream by running cold water (wash under a tap) over the glass sheet.
18. Once the cream is washed off, remove the contact paper to reveal the design.
19. Rinse and dry the glass sheet / glassware.
20. You are done with your etched product and it is ready for use or to give as a gift.

Tips & Warnings:

1. Always start by reading the suggestions from the manufacturer of the etching cream and follow their recommendations.
2. The etching tape should be the right size of the glass sheet (if you are doing etching on plain glass sheet / mirror).
3. Do not apply the acid product if it is too runny (it may seep underneath the tape and also run onto areas of the glass that are not meant to be etched).
4. Do not apply the acid product if it is too thick or grainy (the product may damage your glass).
5. Be sure to apply the acid product with the appropriate type of brush as outlined within the product's instructions.

Glass Etching Techniques

All of the possible glass etching techniques, they can be categorized into 3 major techniques: Surface Etching, Carving and Shading.

Surface Etching:

• Here etching is only dome of the surface of the glass.
• The designs look like positive and negative, or black and white.
• The etched portions of the design always look white and the clear & unetched portions of the design look black or dark.
• All etched elements have to be separated by spaces of unetched glass, or the etched elements blend together as a single silhouette, with no detail inside the border.
• Surface etching is the easiest technique to learn and the fastest way to produce a finished etching on glass.

Carving:

• Here you blast, or carve, deep into the glass, giving a three dimensional etching.
• There are several types of carving, including single stage, two stage, multi-stage, and freehand carving.
• Single stage carving is simply blasting a surface etching design deeply into the glass, separating elements with clear spaces, as in surface etching.
• With two stage or multi-stage carving, the resist is removed, not all at once, but a few elements at a time and in a definite sequence.

Shading:

• Like surface etching, this technique just blasts the surface of the glass.
• But unlike surface etching, the elements in the design are blasted to different apparent shades of gray (hence the name Shading), rather than to the solid white color produced in surface etching.
• You can create shades of gray by etching the surface to a density less than 100%, and you control the shade by controlling the density.
• Shading, like carving, can be done in one stage, two stage, multi-stage, and freehand techniques.

Combinations of techniques:

• Etching can be produced with just one single technique and also by a combination of two or all three techniques.
• You can get effective results by combining etching with other glassworking techniques, like stained glass, glass blowing, etc.

Creative Corner

Drawn towards drawing and painting since childhood gathered knowledge with the usual learning techniques in school & drawing classes.
Used to make rough pencil sketches of school mates in plain paper (my first portrait) and making drawing projects in school, colleges and computer classes. Somehow years went by and the passion to follow my creativity was lost somewhere in between pursuing studies and career.
I found encouragement in the form my husband and in-laws to start paintings once again.

Here are some of my Paintings........

Basic Glass Painting Techniques for Beginners

Basic Glass Lining Instructions:

1. First of all, select a small piece of glass (rectangular will be a good option for beginers) and clean & dry the glass thoroughly.
2. After cleaning glass, place the glass over the top of pattern (start with simple design, like a square or a flower with leaves), so that the pattern is visible under the glass.
3. Make a cone (you can take a square piece of plastic and fold it into a conical shape, like it is done for mehendi) and put the glass liner inside the cone.
4. Make a small cut at the tip to allow the liner to flow out. (The amount of the tip you remove determines the width of the liner. To produce a fine line, cut off the tip of the applicator just above the opening about 1/16 inch down from the tip).
5. Now we have to apply the liner, try tracing out the following the lines of a pattern slowly under the glass.
6. (If it does not flow out of the cone easily it means the material inside is not down in the tip of the cone. Squeeze so that the liner comes at the tip so that the liner comes out smoothly).
7. Before starting, test it on hand or any spare piece of glass to see whether the liner is coming out easily or not.
8. Hold the cone firmly and apply a constant pressure for getting neat and uniform lines.
9. Before beginning each new line, wipe the tip of the cone with a piece of cloth.
10. Hold the cone at a 45 degree angle to work surface, touch the tip to the surface and start squeezing.
11. Lift the cone about 1 1/2" above the work surface and follow the lines of your pattern.
12. Working slightly above the surface, allows more time and readiness to trace a curved line which leaves a smooth traced line.
13. As you complete each line, touch the tip down to the surface, stop squeezing and pull the cone away.
14. Touch down when you start each new line, lift up, let the liner fall along the pattern line and touch down as you stop.
15. Continue each line as far as possible.
16. If there is a pattern where you have to go over another line, just go ahead and follow the procedure as mentioned above.

Useful Tip: Start the lining in the center of the traced pattern and work to the outside. This will help no to smudge the patterns traced inside.

Basic Colouring Techniques:

1. Let the liner to dry for a day before applying colours.
2. Select colours of your choice, or if you have a coloured pattern traced out, follow the colours of the picture. Apply colours within the liner portion as applicable and let it be for another day.
3. Your glass painting is ready……

Useful Tip: Be ready with a toothpick or safety pin. If you find a bubble, try breaking the bubble by pricking it with the toothpick.

Provided with a glass pattern and the final glass painting.

Hi there!! Welcome to my blog.

This is Malini…a Homemaker, Mom, Freelancer and Glass Artefacts Designer (Hobby)….

Drawn to paintings, sketches, portraits, arts & crafts since childhood, I always wanted to be engaged in something creative. Somehow studies, career and family obligations became more important than my passion. Things and priorities changed over the years with the joy of experiencing motherhood and raising a kid.

Somehow despite of all these, tried engaging myself in some creative work and got enrolled in a course.

Studied a few type of Glass Painting Techniques. I utilize my spare time in pursuing my hobby.